|
The RÖNTGEN bi-alfa cobalt
Bandsaw Blade has a high
resistance to wear since a
number of superhard special
carbides are distributed
particularly evenly in the
optimum hardened and
tempered structure of the
tooth tips. Its firm
embedding into a temperature
stable martensitic
environment and the high
cobalt content ensure very
good thermal resistance to
wear. The support band made
of alloyed tempering steel
with approx. 4 % chromium is
the warranty for outstanding
fatigue strength under
reversed bending stresses. |
 |
|
|
The RÖNTGEN HM Titanium
Bandsaw Blade has a very
high resistance to wear and
heat in the tooth tips. This
allows high cutting capacity
for economically efficient
separation. The support band
made of alloyed tempering
steel with approx. 4 %
chromium is the warranty for
outstanding fatigue strength
under reversed bending
stresses. |
 |
|
|
The RÖNTGEN Tool Steel
Bandsaw Blade RRR (flexback)
is made from a steel strip
with pin-point structure
(carbide density 30-50
carbide grains per µm²).
Hard iron carbides ensure a
good resistance to wear at
the tooth tips and in the
support band. |
 |
|
|
The RÖNTGEN Grit Bandsaw
Blade has a high number of
multi-edged carbide grains
which can be applied
permanently onto a highly
flexible support band. These
grains, either on a tooth
segment or continuously
sprayed, form an extremely
high number of cutting
edges. This ensures a very
smooth surface. RÖNTGEN
offers various types of
carbide graining for
different dimensions. |
 |
|
